Finally… a High Power IR Emitter That Won't Lose Sync!
You save $100.01 (67%)
“The ONLY High Power IR Emitter that Floods Your Room
Dear 3D Enthusiast,
Here’s the Story… When we started selling 3D Glasses to customers just like yourself, we started receiving calls from owners of Mitsubishi DLP 3D Ready HDTVs. They wanted to use IR Glasses since they work better than DLP 3D glasses because:
That sounded great, but when we started looking for IR emitters we quickly ran into a major problem.
Here’s The Problem
If you want to use IR 3D Glasses for your DLP 3D Ready TV or Projector, you first need to buy a 3D IR emitter.
Now, you might think…
"Hey not a problem, I’ll just go buy a Mitsubishi 3D Emitter from Mitsubishi or Amazon, right?" …wrong!
What you’ll find out, as we did, is that Mitsubishi will only sell you the 3D emitter if you buy their 3DC-1000 Kit for $400. We personally talked with Mitsubishi and even had one of their customer service managers (Rico) call us back (with a surprisingly arrogant tone) and blow us off by telling us that if you want an Mitsubishi 3D emitter you’ll need to buy the kit, and if you don’t like it… too bad!
Talk about horrible customer service? The whole experience was frustrating, and to be forced to pay through the nose for it? We’re not legal experts but we believe it also violates federal law to force us to buy equipment that you might not need… but we’ll leave that up for the FTC and courts to decide.
FYI, when we told the manager at Mitsubishi that this could violate FTC law and possibly violate consumer rights he could have cared less about that fact and told us if we’re going to talk with the FTC that was our problem…
So Here’s The Solution
We finally found a manufacturer that could make us a High Power IR emitter for your 3D DLP TV or Projector. Just reading over this list of features, we knew it would perform better because:
• Stronger Signal – Other emitters have a signal strength of 50 micro volts while our 3D emitter has a signal strength of 200 micro volts. That means you can be further away from the emitter and still use your 3D glasses. In fact, its been tested up to 50 feet away, the length of five free throws.
• Reversible IR Signal – With this 3D Emitter you can now reverse the IR signal between “Standard” and “Reverse” formats. This will allow you to use both your DLP and IR 3D Glasses at the same time.
• Curved Front Face Plate – The front of our 3D Emitter is curved to increase the maximum broadcast horizontal range offered by any IR Emitter. For example, according to Mitsubishi, their IR Emitter has a horizontal broadcast range of just 100 degrees. Our IR Emitter offers you 120 degrees. You’re no longer limited to sitting right in front of the 3D TV to enjoy it.
• Detachable Cable – The 3-Pin cable can disconnect from the back of the IR Emitter. This allows you the ability to easily replace the cord if it were to ever accidentally break. No other IR Emitter offers you this flexibility and control.
• 1 Year Warranty – This emitter is backed by a 1-year warranty against any defects in design and manufacturing. So you can be confident that its going to do the job, and not fall apart on you.
• Compact Design – With dimensions of 3.12″W x 2.75″ D x 1.25″ H it is a compact design so it won’t take up too much room.
• Also Works On Samsung DLP HDTVs – This emitter will easily work for multiple types of TVs. It’s not limited to just Mitsubishi DLP 3D Ready TVs!
• Mitsubishi Adapter Compatible – Not only will it work by directly plugging it into the Mitsubishi TV but also into the Mitsubishi 3DA-1 adapter box as well. This means you can buy just the adapter and our emitter, and not be forced to buy extra unnecessary equipment.
• Also Works with Optoma 3D-XL Converter Boxes – If you’re using an Optoma 3D-XL with your Optoma projector, you can also connect our High Power IR Emitter to the 3D-XL. With that, and our G5 Universal 3D Glasses, you’ll have a much stronger signal and a better 3D experience than what you would achieve with just DLP!
Free Lifetime Customer Support
We understand getting started in 3D can be confusing and even down right frustrating at times. That’s why we have staff trained in 3D who can walk you through getting the High Power IR Emitter setup.
And the best thing is you will receive this support for FREE for the lifetime of the 3D emitter. Just call us at (800) 918-5390 or by e-mai and we’ll get you taken care of.
The 3D Glasses Unlimited Double Guarantee
90-Day 100% Satisfaction
Here’s how it works: Order our High Power IR Emitter, use it with your IR glasses to watch some 3D movies, TV shows, 3D video games, etc…
And if for any reason, or for no reason at all…
…you’re not completely satisfied, just give us a call at (800) 918-5390 and we’ll help you fix any issue you might have (we find that most problems are fixed in about 5 minutes) Or, if you still just want to return it… that’s fine too. We’ll promptly send you the info on how to return it so you can get a quick, no hassles, no delay full refund… and we’ll still be friends.
This means you can try it out risk free for 3 full months and if you’re not blown away by using our High Power IR Emitter versus DLP 3D Glasses I insist you return it to us and not risk a single penny!
How can we afford to be so generous?… Because I know once you try it out, you’ll love the 3D experience just like other customers.
1-Year Full Coverage Warranty
What “Full Coverage” means is if any part of this High Power IR Emitter were to experience any manufacturer defect, we will replace it for you for free, but we don’t just stop there…
…What that means to you is all you have to do is call (800) 918-5390 and we will make arrangements to ship out a new IR Emitter and get the other one back to us. Plus, we’ll even eat the shipping cost to send the new unit out to you.
Comparison Of Our High Power IR Emitter
High Power 3D IR Emitter
Mitsubishi 3D Emitter
|Stability of Signal Strength:||(5 Stars!)||(2.5 stars)|
|Total Viewing Angle:||120 degrees||100 degrees|
|Viewing Distance Range:||5 to 50 feet||5 to 20 feet|
|Ability to Control Polarity:||Yes||No|
|# of LEDs:||4 LEDs||3 LEDs|
|Package Contents:||• 1 High Power 3D IR Emitter
• 1 Power Cable
• 1 Quick Start Guide
|• 1 Mitsubishi 3D Emitter w/ cord|
Here’s Why You Need to Act NOW!
However, this Emitter is brand new to the market and if they catch wind of this… they’ll hit the roof and force us to stop selling it. So if you want to get in on this deal…
…you need to act now or else you may never have this option available to you again.
Also, we’re not sure what the demand for this IR Emitter will be. We’re guessing that you and the approximate 2,000,000 other 3D DLP TV and Projector owners will want to jump on this right away but unfortunately we only have a few in stock.
Of course if we get too much heat from Mitsubishi because we’re slicing into their profits like a butcher carving a side of beef, then we may have to raise the price or even stop selling them all together.
In addition, our manufacturer is worried that they may not be able to keep up with demand for this High Power IR Emitter.
That means you won’t have a chance to get your High Power IR Emitter especially at a price this low for much longer.
Here’s What To Do Right Now
|Call us at (800) 918-5390 and tell our customer service staff you want the “High Power IR Emitter” and they will be glad to help you process the order. Or add it to your shopping cart to buy safely and securely right now online and get your High Power IR Emitter today before supplies run out.|
|Don’t forget you have a 90-Day, 100% Satisfaction, Money Back Guarantee to try it risk free and you also have a 1-Year Full Coverage Warranty so you can feel safe knowing we got you covered.|